New Ball bearing, 12-Volt Motor and harder longer lasting brushes. Many years of experience and know how have gone into the design of this heavy- duty 12 volt agitator which is fan cooled, 3000 rpm, 1/20 hp, 5 amps with spinner stop. It has a large splash washer on shaft underside of motor, high impact plastic paddle with 5/16” shaft, heavy-duty bearing insert in bottom of 10 1/2" x 4" basket. There is a band around the top of basket for reinforcement and longer life. The arrow on the motor indicates proper direction of rotation, which is a MUST and factory service life of unit is approximately 2,200 hours. Wt. 8 lbs. Each/ Box of 4 = 28lbs. The 90PP has the old standard 9" paddle blade. BASKETS: Impack Tested Nylon

This is a quieter agitator with skirt, which eliminates noise and is designed to concentrate all the agitation right into the vats. 110-volt fully enclosed 1/20hp heavy-duty 1550 rpm 1.5 amps fan cooled continuous duty motor with special factory sealed bearings. Motor is designed especially for agitators. Factory built in 8 ft cord and grommet. It has 5/16" shaft and high impact plastic paddle, 10 1/2" x 4" basket, extra heavy-duty replaceable lower bearing centered by precision machinery for perfect alignment. It has a ring for hanging, large washer underside motor prevents water from entering lower motor bearing and thermo overload protection. One year pro rata guarantee. Wt. 8lbs ea.

This size agitator was designed to fill the gap between the standard and the Big Bull agitators. It gives much more agitation than the standard agitator and keeps many more minnows alive and is recommended for larger vats and troughs. The No. 15 has 1650 rpm, 2.5 amps, continuous heavy-duty grounded motor (1/15hp), wide stout paddle and shaft for longer life, 10 1/2” x 4” basket with a heavy-duty bearing in bottom. The baskets are epoxy- coated steel and the motor has overload protection. Fully guaranteed. Wt. 9lbs. Box of 4 = 34lbs