SONIC ALGAE SOLUTIONS

Eliminate algae in pools, ponds, lakes, lagoons, reservoirs and tanks.

Wondering how to remove algae from your water without expensive toxic chemicals? Sonic Algae Solutions is the answer. Sonic Algae Solutions eliminates your algae problems by using an environmentally safe technology that kills existing algae and controls future growth. The submerged ultrasonic transducer is programmed to generate the precise frequency of ultrasonic waves that destroys algae's cellular functioning and structure.

Depending on site conditions, initial results can be seen within two weeks of installation. Over a period of an additional 6 to 12 weeks, Sonic Algae Solutions will kill the algae that subsequently bloom from the algae spores that are present in the water. After 12 weeks, the device will continue to keep your water basin clear with 24-hour, low-cost, low-maintenance algae control.

Easy to Install and Maintain

Sonic Algae Solution device emits ultrasonic waves that “fan out” at approximately 180℉ from the front of the transducer (see Figure 1). The nutrient level, turbidity, shape of the body of water and the closeness to the equator may affect the coverage area. The potential coverage for the SS 400 model can be as much as 1.5 acres and for the SS 500 model up to 3 acres.

	Set up your device to provide the optimal exposure of the ultrasonic waves to the body of water you are treating. Place close to the edge as sonic waves extend only in front of the transducer unit. Large installations and certain shapes of ponds or lakes may require installation of more than one device. Multiple devices can be installed at opposite sides of a lake or pond or attached together pointing in different directions, depending on your site requirements.
	The Sonic Algae Solutions device, like all ultrasonic devices, is a “line of sight” technology. Ultrasonic sound waves will not go around corners or navigate around islands that may be in your body of water. Ultrasonic sound waves reflect or bounce off of hard surroundings, such as concrete, rip-rap, and large rocks
	Need help? For FREE placement assistance FAX us a site-plan of your water site to: 580.777.2899 or EMAIL sales@dunnsfishfarm.com. Make sure that your site-plan includes accurate dimensions and shape configurations of your water site.

USE THE DROP DOWN MENUS BELOW TO PICK THE RIGHT UNIT FOR YOU.